EKF - Short Profile
EKF - Short Profile


C43-SATA

Internal USB/SATA Connectors

Low Profile Mezzanine Module


HTML documents available here

PDF documents available here


C43-SATA

Description

Technical Information
Block Diagram
Ordered List

Suitable Carrier Cards

CCM | PC1 | PC2 | PCS | SC1

General Information

Mezzanine Overview
C4x Series Overview
Mezzanine Concept

Alternate Low Profile Mezzanine Modules

C20 | C40 | C41 | C42 | C47
Alternate Mezzanine Side Boards
Additional 4HP Assembly Height

C23 | C32 | C44 | C45 | CCI | CCK | CCL | CCO | PCS

C43-SATA Internal SATA Connectors Low Profile Mezzanine Module
Download area for drivers

SATA Drivers


CCM | CCM | PC1 | PC1 | SC1 | PCS

Download a photo in print quality
Photo Gallery

1 | 2 | 3 | 4 | 5
Print Quality 300dpi 10x15cm .JPG ©EKF
If setup for non-tabbed browsing, images are displayed in a secondary browser window

C43-SATA

Internal USB/SATA Connectors Low Profile Mezzanine Module


Available as a mezzanine add-on expansion board to the CCM-BOOGIE and successor CPU carrier cards, the main purpose of the C43-SATA is to provide SATA and USB connectors for system internal usage. In addition, the C43-SATA can accommodate an USB Flash drive module. The C43-SATA is designed to fit into the 4HP (20.32mm pitch) envelope of a CPCI CPU carrier board.


Up to four SATA connectors (latching headers) are optionally available on the C43-SATA, for attachment of system internal drives by ordinary latching SATA cable harnesses. The C43-SATA can be optionally equipped with up to 2 horizontal mount USB type A host receptacles, for system internal use.

C43-SATA - Internal SATA Connectors Mezzanine Module

C43-SATA - Internal SATA Connectors Mezzanine Module
The USB SSD module shown above is not scope of delivery
Please refer to list 20 for actual C43-SATA connector population

C43-SATA Low Profile Module Mounted on a CPU Carrier Card

C43-SATA Low Profile Module Mounted on a CPU Carrier Card

C43-SATA Block Diagram (click here for PDF document)

C43-SATA Block Diagram

C43-SATA Mezzanine over CPU Carrier Card

C43-SATA Mezzanine over CPU Carrier Card
Feature Summary
Form Factor Proprietary size mezzanine module, fits basically into the 4HP (20.3mm) envelope of the CPU carrier board, typically delivered as a ready to use assembly unit (including the CCM-BOOGIE, PC1-GROOVE, SC1-ALLEGRO or similar CPU card), mounting position right (on top of CPU board)
Host I/F Connector (Bottom Mount to CPU Carrier)
  • High Speed mezzanine connector suitable for CCM-BOOGIE, PC1-GROOVE, SC1-ALLEGRO and successor CPU carrier boards
  • up to 4 x SATA channels (RAID option)
  • 4 x USB 2.0 ports
SATA Usage
  • P-SATA1 horizontal mount latching connector (typically from the PCH southbridge on a CPU carrier board)
  • P-SATA2 and P-SATA3 horizontal mount latching connectors (typically derived from the CPU carrier board secondary SATA controller)
  • P-SATA4 horizontal mount latching connector (typically from the PCH southbridge on a CPU carrier board, not functionable with CCM-BOOGIE carrier board), not available together with J-USB3
USB Usage
  • Up to 2 x USB 2.0 type A receptacles, horizontal mount (option only). Please note that additional headroom is required beyond 4HP for USB cable connectors.
  • Up to 1 x USB Solid State Drive (SSD), low profile, top mount
USB Solid State Drive
  • Optional pin header for industrial grade USB Solid State Drive (SSD)
  • Suitable for 2.0mm pitch low profile connector module
Top Mount Connectors
  • P-SATA1 to P-SATA4 for attachment of system internal SATA drives (latching cable harness)
  • Option J-USB3 for system internal attachment of USB devices - not available together with P-SATA4
  • Option J-USB4 for system internal attachment of USB devices - not available or at least not usable together with USB SSD
  • Option P-UFD1 pin header for low profile USB SSD module (top mount)
Thermal Conditions

Environmental Conditions

Specials

  • Operating temperature: 0°C ... +70°C
  • Option -40°C ... +85°C
  • Storage temperature: -40°C ... +85°C, max. gradient 5°C/min
  • Humidity 5% ... 95% RH non condensing
  • Altitude -300m ... +3000m
  • Shock 15g 0.33ms, 6g 6ms
  • Vibration 1g 5-2000Hz
  • RoHS compliant
  • Coating, Sealing, Underfilling on request
  • Long Term Availability
EC Regulations
  • EN55022, EN55024, EN60950-1 (UL60950-1/IEC60950-1)
  • 2002/95/EC (RoHS)
Ordering Information
Please refer to List 20 for popular C43-SATA SKUs
EKF is an ISO-9001 certified company
EKF Elektronik GmbH • Philipp-Reis-Str. 4 • 59065 Hamm • Germany
Phone +49 (0)2381/6890-0 • Fax +49 (0)2381/6890-90 • E-Mail